-
Automatic 0.1-5L round can production line
The can making production line is suitable for the automatic production of 0.1-5L round can, which is composed of three metal plates: can body, can cover and can bottom. The can body is round.
Technical flow:cutting the tin sheet to blank-rounding-welding-outer coating-flanging-bottom lid feeding-seaming-turning over-top lid feeding-seaming-+ear lug welding-leak testing-packaging -
Automatic1-5L rectangular can production line
Changtai is a can making machine factory in Chengdu City China. We build and install complete production lines for three piece cans.Including Automatic Slitter,Welder,Coating,Curing,Combination system.The machines are used in industries of Food packaging, Chemical packaging, Medical packaging, etc.
-
Automatic10-20L square can production line
The can making production line is suitable for the automatic production of 10-20L square can, which is composed of three metal plates: can body, can cover and can bottom. The can is square shaped.
-
Automatic 30-50L large barrels drums pails canbody production line
Fully automatic,High speed,adjustable size,professional design to installation and trial run service,with high efficiency work,The can making production line is suitable for the automatic production of 30-50L large barrel.
-
Automatic10-25L conical round can production line
The can making production line is suitable for the automatic production of 10-25L conical pail, Turnkey can making systems,We provide a complete range of machines and components for the can making industry focusing on three-piece can production lines and end making systems.
-
5L-25L Food Cans Oil Cans Round Cans Square Cans Tin Can Seam Welding Machine
Can diameter range:65-180mm. or 211-700 cans.
Apply to the welding of various can,such as Foodcans,ink cans,convenience cans.
Can be matched with inner powder and out coater, can accelerate the speed.
-
Large round can square cans big oil barrel beer barrel automatic can body welding machine
The FH18-90ZD 30, a welder for metal container making, it is usually used in making of a paint tin can /bucket /pail/ barrel /drum.
Applied for (2.5-5 Gallon or 9.5 L-20 L)metal container making industry, food or chemical tin can making industry,the diameter range is φ220-300mm(8.6-11.8 inches).
-
Welding Machine for the Making of Metal Cans Pails Buckets Barrels and Drums
This FH18-90ZD-25 is for metal pail making industry, Metal Pail Bucket Drum Body Welder, Paint Tin Can Pail Bucket Drum Making Machine, the diameter range is φ250-350mm(10 to 13 3/4 inches). Height range 260-550mm(10 1/4 to 21 1/2 inches). It is fine with general 5-gallon metal pail making.
-
30L-50L large barrel round metal can oil barrel beer barrel can seam welding machine
To find large barrel round metal can oil barrel beer barrel can seam welding machine, get to know the price of metal can making machine, custom metal can produccing line, Tin Can making Machine supplier Chengdu Changtai Can Manufacture Equipment Co.,ltd
To learn more about this 30L-50L can seam welding machine, please check the details below!
-
Can making machine powder system for metal can round can square can
The consumption of compressed air is very low, only for pneumatic control, the maximum is 150L.
-
Can making machine outside inside coating machine for metal can round can square can
Connected with the welding machine, the cantilever upward suction belt conveying design is convenient for powder spraying, and the front compressed air cools the weld seam to avoid powder agglomeration or glue foaming when the weld seam temperature is too high.
-
Can making machine dryer can dryer High frequency electromagnetic dryer
Compared with the belt, the stainless steel chain has no wearing parts. Compared with the belt, it will be replaced after a long time of use, or it will be scratched if it gets stuck during the transportation process. Users will use it with peace of mind.