Can making machine powder system for metal can round can square can
Can making machine powder system for metal can round can square can
Technical Parameters
| Model | CTPC-2 |
| Production Speed | 5-60m/min |
| Powder width | 8-10mm 10-20mm |
| Can Body range | 50-200mm 80-400mm |
| Material | Tinplate/steel-based/chrome plate |
| Power Supply | 380V 3L+1N+PE |
| Air consumption | 100-200L/min |
| Machine Measurements | 1080*720*1820 |
| Weight | 300kg |
1. The consumption of compressed air is very low, only for pneumatic control, the maximum is 150L.
2. The powder fluidization in the powder barrel adopts the high-pressure hot air discharged by the imported high-pressure fan as the fluidization gas to heat and fluidize the powder in the barrel. On the one hand, it saves compressed air (equivalent to saving a 5.5KW compressor), on the other hand, it effectively solves the problem of moisture in the powder.
3. The recovered powder goes through a recovery channel equipped with strong magnetism to remove iron impurities such as burrs produced by welding, and then enters the vibrating screen together with the new powder for screening to remove non-metallic impurities in the powder, and to clean the new powder. The agglomerates in the powder are crushed.
4. The recovery fan exhaust adopts 8 titanium alloy filter elements, which are durable, and each filter element is isolated with a protective tube. When the filter element is cleaned, it can reduce the blown powder to the other 7 that are still recovering and exhausting. Only the impact of the filter element, and effectively alleviate the impact of the filter element on the recovery port during back-flushing cleaning.
5. The back blowing of the filter element adopts a unique structure. When the filter element is back blown, the opening of the filter element can be sealed, the back blowing gas can be effectively used, and the impact on recovery can be reduced. The powder bucket is equipped with a vibrating motor, which reduces the chance of powder sticking to the filter element.
6. After each powder spraying, the machine can automatically clear the remaining powder in the powder spraying pipe to eliminate the accumulation and blockage of the remaining powder in the powder pipe, which will cause uneven powder spraying of the next tank.
7. When it is working automatically, it will automatically delay when it stops (the time can be set arbitrarily) to clean all the accumulated powder in the pipeline.
8. In order to prevent
