Can making machine outside inside coating machine for metal can round can square can

1. Connected with the welding machine, the cantilever upward suction belt conveying design is convenient for powder spraying, and the front compressed air cools the weld seam to avoid powder agglomeration or glue foaming when the weld seam temperature is too high.
2. Imported belt is used for conveying, and the welded can body is sucked under the conveyor belt, so that there is no need to adjust the conveying height when changing the can type, and the conveying is stable
3. In order to prevent the glue from being uneven after rolling out, a brush is installed at the outlet of the coating wheel. In order to overcome the fact that the brush brings glue into the tank, an induction switch is installed to control the cylinder so that the brush will only go down when there is a tank, and rise when there is no tank. , so that the glue does not get into the tank.
4. For the convenience of debugging the welding machine, an air cylinder is installed to lift the entire conveying and outer coating parts upwards and backwards, thus avoiding the disadvantage of inconvenient debugging of the welding machine for upward suction conveying.
5. Cleaning plates are installed on both sides of the outer coating belt rubber wheel and the roller, so that the glue does not pollute the side of the coating wheel and ensures the cleanliness of the coating wheel.
6. Our company can make the external spraying method according to the customer's requirements, but the external coating must be the bottom conveying method (the connection with the welding machine is the upward conveying method). The conveying of the touch-up coating machine with internal coating and the welding machine must have belts on both sides of the welding seam, so as to stably keep the can body welding seam at the same height and line.